M.TECH./M.ARCH./M.U.R.P. & Ph.D Admissions 2009 - IIT Roorkee

Indian Institute of Technology Roorkee

Postgraduate & Ph.D. Admissions 2009


Admissions for the academic session 2009-10 to the following Postgraduate(PG) Programmes leading to M.Tech./M. Arch./ MURP will be made on the basis of either GATE percentile only or GATE percentile and Interview/Written Test . For Sponsored candidates the admission will be made on the basis of Interview/ Written Test and relevant experience. The details regarding various Departments/Centres, academic programmes, number of seats, and minimum educational qualifications are given in seriatim below. (Example: Department - Programme / Seats / Minimum Educational Qualification).

M.TECH./M.ARCH./M.U.R.P. PROGRAMMES

Department of Architecture and Planning


i) Architecture / 16 / B.Arch. or its equivalent

ii) Urban & Rural Planning / 16 / B.Arch. or its equivalent or Bachelor’s degree in Civil Engg.

Alternate Hydro Energy Centre


i) Alternate Hydro Energy Systems / 22 / Bachelor’s degree in Civil/Elect./Mech./ Industrial /Chemical/Electronics/Computer/Agricultural/Environmental Engg. or equivalent.

ii) Conservation of Rivers & Lakes / 14 / Bachelor’s degree in Civil/Electrical/ Mechanical /Industrial/Chemical/Agriculture/Environmental Engg./Arch./Town Planning, or equivalent or Master’s in Science in any subject with Mathematics at graduation level.

Department of Chemical Engineering


i) Computer Aided Process Plant Design/24/Bachelor’s degree in Chemical/ Biochemical/Pulp & Paper/Chemical Technology/ Petrochemical/Polymer Technology/ Petroleum Refining or equivalent

ii) Industrial Pollution Abatement / 24 / Bachelor’s degree in Chemical/Pulp & Paper/ Civil / Biochemical/ Petroleum/ Environmental Engg./ Chemical Technology/ Polymer Technology or equivalent.

iii) Industrial Safety and Hazard Management/14/ Bachelor’s degree in Chemical/
Mechanical / Biochemical/Petroleum/ Environmental Engg./ Chemical Technology/ Pulp & Paper Engineering/Polymer Technology or equivalent.

Department of Civil Engineering


i) Building Science & Technology / 16 / Bachelor’s degree in Civil Engg./ Structural Engg. /Construction Technology, or equivalent, B. Arch. Three seats are reserved for Architecture candidates

ii) Computer Aided Design / 16 / Bachelor’s degree in Civil Engg. or its equivalent.

iii) Environmental Engineering / 16 / Bachelor’s degree in Civil Engg./Chemical Engg./ Environmental Engg., or equivalent.

iv) Geomatics Engineering/ 16 / Bachelor’s degree in Civil Engg./Electronics Engg./ Electrical Engg./Computer Science/Information Technology/Marine Engg./Mining Engg./ Architecture, or equivalent.

v) Geotechnical Engineering (with diversification to Rock. Mech.) / 16 / Bachelor’s degree in Civil Engg. /Mining Engg., or equivalent.

vi) Hydraulic Engineering / 16 / Bachelor’s degree in Civil Engg./Mechanical Engg./ Chemical Engg./Agricultural Engg. or equivalent.

vii) Structural Engineering (with diversification to Bridge Engg.)/ 16 / Bachelor’s degree in Civil Engg. or its equivalent.

viii) Transportation Engineering (with diversification to Traffic Engg.)/ 16 / Bachelor’s degree in Civil Engg. or its equivalent.

Department of Earthquake Engineering


i) Soil Dynamics / 16 / Bachelor’s degree in Civil/Structural Engg. or equivalent.

ii) Structural Dynamics / 27 / Bachelor’s degree in Civil /Structural, or equivalent.

Department of Electrical Engineering


i) Electric Drives & Power Electronics / 20 / Bachelor’s degree in Electrical Engg. or its equivalent.

ii) Measurement & Instrumentation / 20 / Bachelor’s degree in Electrical/Electronics & Comm./Instrumentation Engg., or equivalent.

iii) System Engg. & Operations Research / 20 / Bachelor’s degree in Electrical/ Electronics & Comm./Instrumentation Engg., or equivalent.

iv) Power System Engg. / 20 / Bachelor’s degree in Electrical Engg. or its equivalent.

Department of Electronics and Computer Engg.


i) Communication Systems / 16 /Bachelor’s degree in Electronics & Comm. Engg. or its equivalent.

ii) Control & Guidance / 14 /Bachelor’s degree in Electronics & Comm. Engg./Elect. Engg. or equivalent.

iii) R. F. & Microwave Engg./ 14 /Bachelor’s degree in Electronics & Comm. Engg. or its equivalent.

iv) Semiconductor Devices & VLSI Technology/ 14 /Bachelor’s degree in Electronics & Comm. Engg. or its equivalent.

v) Computer Science & Engg. / 27 /Bachelor’s degree in any branch of Engg./ Tech. or M.Sc. in Electronics/Computer Science/Physics/Maths/Statistics or MCA.

vi) Information Technology/ 20 /Bachelor’s degree in any branch of Engg. /Tech. or M.Sc. in Electronics/Computer Science or MCA.

Department of Hydrology


Hydrology / 14 / Bachelor’s degree in Civil/Mechanical/Agricultural Engg./Hydrology or its equivalent; M.Sc./M.Tech. in Chemistry/Geology/Geophysics/Applied Geology/ Applied Geophysics/Physics/ Meteorology/ Geography/Atmospheric Physics/Env. Science with mathematics in B.Sc. as one of the subjects or M.Sc. (Master’s) degree in Statistics with physics or mathematics at B.Sc., or M.Sc. degree in Mathematics with Physics in B.Sc. or its equivalent.

Department of Mechanical and Industrial Engg
.

i) CAD, CAM & Robotics/14/Bachelor’s degree in Mechancial/Industrial/Production Engg. or equivalent.

ii) Machine Design Engineering / 16 / Bachelor’s degree in Mechanical /Industrial / Production /Aeronautical/Automobile Engg. or equivalent.

iii) Production & Industrial Systems Engineering / 16 / Bachelor’s degree in Mechanical / Industrial/Production Engg. or equivalent.

iv) Thermal Engineering / 16 / Bachelor’s degree in Mechanical/Industrial/Production/ Chemical /Aeronautical/Automobile Engg. or equivalent.

v) Welding Engineering / 16 / Bachelor’s degree in Mechanical / Industrial /Production/ Metallurgical Engg. or equivalent.

Department of Metallurgical and Materials Engg.


i) Corrosion Engineering / 16/ Bachelor's degree in Metallurgical & Materials Engg. or its equivalent or Engineering Graduate of all branches or M. Phil degree in Chemistry, Physics or Materials Science.

ii) Industrial Metallurgy / 16 / Bachelor’s degree in Metallurgical /Mechanical / Industrial /Production Engg. or equivalent.

iii) Physical Metallurgy / 16 / Bachelor’s degree in Metallurgical Engg. or its equivalent.

Department of Paper Technology, Saharanpur Campus


Pulp & Paper / 16 /B.Tech./B.E. degree in Chemical Engg. or Chemical Technology/ Pulp & Paper Engg./Mechanical Engg./Polymer Engg./ Biotechnology/Cellulose Technology/Alcohol, food and Fermentation Technology, or equivalent.

Note:- The two years Post B.Sc. diploma awarded by the IPT/DPT plus a minimum of two years relevant experience in Industry/Research Organization will be considered equivalent to a B.Tech./B.E. degree.

Department of Water Resources Development & Management

(i) Irrigation Water Management/3/Bachelor’s degree in Civil Engg. or its equivalent /Agricultural Engg. or M.Sc. Agriculture in Agronomy, Soil Science, Agrometerology with mathematics as one of the papers at the level of B.Sc./ B.Sc. Agriculture.

(ii) Water Resources Development/11/ Bachelor’s degree in Civil /Electrical/ Mechanical /Electronics & Telecommunicaton Engg. or equivalent.

Department of Chemistry

M. Tech. (Advanced Chemical Analysis )/ 14 / B. Tech. (Chemical Engg.)/M.Sc. (Chemistry)/ M. Sc. (Environment Science) or its equivalent.

Department of Physics

M.Tech. (Solid State Electronic Materials) / 16 / B.Tech. Engg. Physics/M.Sc. (Physics) /Bachelor’s degree in Electrical/Electronics/Metallurgical Engg. or its equivalent.

Centre for Nanotechnology

M.Tech. (Nanotechnology) / 15 / B.Tech. (Met. & Mat. Engg./Mech. Engg./E&C/ Electronics /Chemical Engg./Pulp & Paper/Biotechnology) or its equivalent; M.Sc. (Physics /Chemistry/Biotechnology) or its equivalent with Mathematics at 10+2 or higher level.

NOTE : The Minimum Duration for all Programmes will be 4 Semesters for Full Time and 6 Semesters for Part Time candidates.

APPLICATION FORM AND INFORMATION BROCHURE

Application Form can be obtained as follows:-

(a) Download Application Form from Institute website: The Application Form alongwith the Information Brochure can be downloaded from Institute website http://www.iitr.ernet.in from March 23, 2009 to April 23, 2009.

(b) Obtain Application Form by making written request : The Application Form alongwith the Information Brochure can be obtained from the “Chairman, PG Admission, IIT Roorkee, ROORKEE-247 667 by sending a Demand Draft of Rs. 50/- drawn in favour of “Chairman, PG Admission, IIT Roorkee” payable at Roorkee, along with two self addressed slips which should reach latest by April 17, 2009.

SUBMISSION OF FILLED APPLICATION FORM

The filled Application Form (Downloaded from Institute website or Obtained by written request as the case may be) alongwith Application Fee through a Demand Draft drawn in favour of “Chairman, PG Admission, IIT Roorkee” payable at Roorkee, as given below be sent to the “Chairman, PG Admission, IIT Roorkee, ROORKEE-247667”.

For General/OBC Category : Rs. 400/- + *Rs. 100/-
For SC/ST/PD Category : Rs. 200/- + *Rs. 100/-

*Rs. 100/- per additional department (if applied)

IMPORTANT NOTE


A candidate may apply maximum for four Departments and 14 different programmes but ONLY ONE Application Form is to be filled-up. However, fee of Rs. 100/- per additional Department shall be payable by the candidate. Admission will be made strictly on the basis of order of preferences for eligible programmes/GATE disciplines.

ELIGIBILITY CRITERIA


A minimum aggregate score of 60% or 6.00 CGPA on 10 point scale for General/ OBC candidates and 55% or 5.50 CGPA on 10 point scale for SC/ST/PD candidates at the qualifying degree is essential for all the above programmes.

ADMISSION CRITERIA


Admission will be made on the basis of either GATE percentile only or GATE percentile and Interview/Written Test. For Sponsored candidates the admission will be on the basis of Interview/Written Test and relevant experience. There will be cut offs for calling the candidates for Interview/Written Test and/or for preparing merit list for different programmes for different categories of candidates.

B.Tech. degree holders from IITs with minimum CGPA of 8.00 on 10 point scale will also be eligible for admission with MHRD assistantship without GATE score upto 10% of the Intake.

RESERVATION OF SEATS


Certain number of seats are reserved for candidates belonging to SC/ST/OBC categories and Person with Disabilities (PD) as per the Govt. of India rules. For details refer to the Information Brochure.

FINAL YEAR CANDIDATES


Candidates appearing for the final year of their qualifying examination are also eligible to apply.

LAST DATE


Last date for receipt of filled Application Form (Downloaded or Obtained by written request as the case may be) along with Application Fee is April 23, 2009.

Ph.D. PROGRAMMES

Application Form and other details for admission to Ph.D. programmes in the Autumn Semester of the Session 2009-10 can be downloaded from the Institute website www.iitr.ernet.in. The Application Form can also be obtained from the “Chairman, PG Admission, IIT Roorkee, Roorkee-247667” by sending a written request and a DD of Rs. 50/-. The filled Application Form may be sent to the “Chairman, PG Admission, IIT Roorkee, Roorkee- 247667”, along with a Demand Draft of Rs. 200/- drawn in favour of “Chairman, PG Admission, IIT Roorkee” payable at Roorkee. Last date for receipt of filled Application Form for Ph.D. programmes is April 23, 2009.

For more details visit the Institute website: www.iitr.ernet.in or contact “Chairman PG Admission Office” at Phone No. 01332-284010/285875

Post a Comment

Previous Post Next Post