POST GRADUATE ADMISSION: 2008-2009 M.Tech / MUDP of MAULANA AZAD NATIONAL INSTITUTE OF TECHNOLOGY, BHOPAL

---

MAULANA AZAD NATIONAL INSTITUTE OF TECHNOLOGY (MANIT),
BHOPAL - 462051

POST GRADUATE ADMISSION: 2008-2009

M.Tech/MUDP Admissions

Applications are invited for admission to the following M.Tech./MUDP Courses. The selection will be on the basis of combined merit of GATE score and institute test. However, if GATE qualified candidates are not available, non-GATE candidates will be considered on the basis of institute test without any stipend.

(1) Power Systems
Discipline Required at Degree Level:- Electrical/ Electronics & Electrical Engg.

(2) Hydro Power Engineering
Discipline Required at Degree Level:- Civil/ Mechanical / Electrical / Agricultural Engg.

(3) Thermal Engineering
Discipline Required at Degree Level:- Mechanical / Electrical/ Automobile/ Chemical /Agricultural Engg.

(4) Engineering Materials
Discipline Required at Degree Level:- Any Branch of Engg.

(5) Geotechnical Engineering
Discipline Required at Degree Level:- Civil Engg.

(6) Stress & Vibration Analysis
Discipline Required at Degree Level:- Civil/ Mechanical / Aeronautical Engg.

(7) Digital Communication Engg.
Discipline Required at Degree Level:- Electronics/ Electronics & Communication/ Electronics & Instrumentation/ Electronics and Tele Communication / CSE/ Information Technology / Electrical Engg

(8) Energy
Discipline Required at Degree Level:- Any Branch of Engg./Architecture and planning

(9) Urban Development Planning (MUDP)
Discipline Required at Degree Level:- Architecture and Planning, the student with Master Degree in Geography/ Economics/ Sociology (Social Science) Statistics / Operations Research

(10) Maintenance Engineering and Management
Discipline Required at Degree Level:- Mechanical / Production / Automobile / Industrial / Chemical/ Agri. Engg.

(11) Environmental Engineering
Discipline Required at Degree Level:- Civil/ Architecture and planning

(12) Information Security
Discipline Required at Degree Level:- All Branch of B.Tech./ B.E.

(13) VLSI & Embedded System Design
Discipline Required at Degree Level:- Electronics/ Electronics & Communication/ Electronics & Instrumentation/ Electronics and Tele Communication / CSE/ Information Technology / Electrical Engg

(14) Electrical Drives
Discipline Required at Degree Level:- Electrical / Electronics & Communication Engg.

(15) Remote Sensing & Geoinformatics
Discipline Required at Degree Level:- Civil/ Architecture and Planning / Environmental / Computer Science / and Master Degree in Geography / Agriculture / Forestry / Sociology / Economics.

(16) Structure
Discipline Required at Degree Level:- Civil Engineering

(17) Bio-informatics
Discipline Required at Degree Level:- All Branches of B.E./ B.Tech., B. Pharm., M.Sc. in Physical Science, Life Sciences, Computer Science, IT, Bio-informatics, MCA, Bachelor in Medical Science, Bachelor in Agriculture Science

(18) Nano Technology
Discipline Required at Degree Level:- All Branches of B.E./ B.Tech.,/ M.Sc. Physics

(19) Industrial Design
Discipline Required at Degree Level:- Mechanical / Automobile/ Industrial Production/ Electrical Engg.

(20) CSE
Discipline Required at Degree Level:- Computer Science & Engineering/ Information Technology/ Electronics & Communication Engg./ Electrical Engg.

(21) Transportation Engg.
Discipline Required at Degree Level:- Civil Engineering

Note:

1 Institute test shall be held in second week June 2008, Details of test schedule and syllabus will be available on MANIT website www.manit.ac.in.

2 For M.Tech./MUDP Admission: Candidates possessing. appropriate degree with a minimum 60%(6.0 in credit and grade system) marks in final Year of their qualifying degree & 55%(5.5 in credit and grade system)for SC/ST category candidates.

3 Gate qualified candidates admitted in above mentioned M.Tech full time courses will be given stipend as per GOI norms.

4 The reservation (SC/ST/PH/etc.) will be as per GOI norms.

5 The admission to all M.Tech. programmes will be on the basis of merit list giving 60 % weightage to GATE score and 40% weightage to institute test.

6 Candidates appearing for Final Year Examination may also apply but they should submit their result at the time of admission.

7 Sponsored and non Gate candidates (if GATE candidates are not available) for M.Tech. will be selected only through Institute test.

8 The application forms completed in all respects should be submitted up to 30th May 2008 with a crossed IPO/Bank Draft of Rs. 400/- payable to “MANIT, Bhopal” for general candidates (Rs. 200/- for SC/ST candidates) to Asstt. Registrar (Admission) MANIT, Bhopal – 462051. If a candidate is applying for more than one course, separate applications along with IPO/Demand Drafts should be submitted for each course. Applications received after due date are likely to be rejected.

9 The application form/syllabus can be down loaded from MANIT website www.manit.ac.in and can also be collected from admission section, MANIT, by paying Rs. 50/- through IPO/Bank Draft payable to MANIT, Bhopal or by post sending a self addressed A4 size envelope with IPO/Bank Draft of Rs. 50/-

10 List of selected candidates will be made available on the website within a week of institute test. No individual intimation will be sent to the candidate.

Visit website www.manit.ac.in for further details

TO DOWNLOAD FORM CLICK HERE

For More Details Please CLICK HERE

---

Admission To Ph.D. AND M.S. (BY RESEARCH) & Ph.D. AND M.Phil. IN SCIENCES AND LANGUAGES 2008 (VIT UNIVERSITY)

---

VIT UNIVERSITY
Vellore-632014, Tamil Nadu
Phone: +91-416-4207070, 2202168/ 2202157
Fax: 0416-2245544, 2240411
Email: admission@vit.ac.in
www.vit.ac.in

Admission To Ph.D. AND M.S. (BY RESEARCH) & Ph.D. AND M.Phil. IN SCIENCES AND LANGUAGES 2008

(1) Ph.D. AND M.S. (BY RESEARCH) Degrees in Engineering Disciplines

School of Mechanical & Building Sciences:
High Performance Concrete-High Volume Fly Ash Concrete-Fracture Properties of Concrete; RCC Structures-Steel Structure-Reliability Analysis of Structures-Finite Element Analysis of Structures-Earthquake Resistant Structures-Low Cost Materials-Expansive Soils; Ground Water Hydrology-Remote Sensing and GIS-Environmental Geochemistry; Cryogenics; Thermal Sciences.

School of Bio-Technology, Chemical & Bio-Medical Engineering:
Bio-Medical Engineering; Bio-informatics; Bio-technology; Bio-sciences; Cancer Biology; Plant Bio-technology; Bio-medical Genetics; Applied Microbiology; Bio-Chemistry.

School of Computing Sciences:
Graphics; Image Processing; Cryptography; Vision Systems; Human-Computer Interaction; Computational Intelligence; Wireless Security.

School of Electrical Sciences:
Power Systems; Energy Systems; Biomedical Engineering; Instrumentation; Applied Electronics; Devices Fabrication using Scanning Probe Microscopy based Nanolithography Techniques; Simulation Models for Low Nanoscale Feature Sized Devices; Modeling and Simulation of Semiconductor Materials and Devices; Nanoscale Device Modeling; Light Sources and Detectors for Optical Fiber Communication; Smart Materials; Nano Composites; Power Distribution System; Nanomaterials; Photonics.

VIT-Business School:
Economics & International Finance; Entrepreneurship; Finance & Accounting; Finance & Capital Markets; International Business; Marketing Management and General Management; Operations Management; Organizational Behaviour & Human Resources Management; Taxation.

Centre for Bioseparation Technology (CBST):
Proteomics; Mammalian Cell Culture Studies; Monoclonal Antibodies Production & Purification; Analysis of the Plant Extracts for Bioactive Molecules.

(2) Ph.D. AND M.Phil. IN SCIENCES AND LANGUAGES

Languages [English]:
American Literature; English Language Teaching (ELT)

Mathematics:
Algebra; Algebraic Coding Theory; Fluid Dynamics; Geometric Function Theory; Graph Theory; Mathematical Programming; Numerical Analysis; Optical Control Problems; Stochastic Processes and Queuing Theory; Wavelet Analysis and its Application;

Physics:
Crystal Growth; Gas Sensor; Medical Physics; Nano Materials; Semiconductor; Spectroscopy; Theoretical Nuclear Physics; Thin Film; Ultrasonics;

Chemistry:
Environmental Analytical Chemistry; Colloid and Surface Science, Corrosion; Bio & Electro Chemical Sensors; Phyto Chemistry and Bio-Remediation; Inorganic Solid State Chemistry; Nano Materials, Batter Materials; Nitrogen Hetero Cycles; Physical Organic Chemistry; Bio Active Peptides; Quinoline Chemistry; Pharmaceutical Formulations.

Eligibity:

a. For Ph.D. in Engineering

(1) Master’s degree in Engineering/Technology in the relevant discipline with a first class or a minimum of 60% marks/CGPA 6.5 on a 10 – point scale in cases where the University/Institute does not award any class (or)

(2) Equivalent qualifications like M.Sc. (Engineering) / M.S. [By Research.]

b. For M.S. (by research) Degree

(1) A Bachelor’s degree in Engineering/Technology or Master’s degree in Science or Master’s degree in Computer Applications (with Physics & Mathematics at Bachelor’s level) with a first class or a minimum 60% marks/CGPA 6.5 on a 10- point scale in cases where the University/Institute does not award any class.

(2) Associate membership of the following professional bodies with a pass in both Parts A & B with 60% marks. (Such candidates are eligible for admission to M.S. (by research) Programme in their parent discipline. Their eligibility for other disciplines will be decided on a case-to-case basis).

1. The Institution of Engineers (India)
2. The Aeronautical Society of India
3. The Indian Institute of Metals
4. The Indian Institute of Chemical Engineers
5. The Institution of Electronics and Telecommunication Engineering


c. For Ph.D. / M.Phil. in Sciences/ Languages
Master’s degree in the relevant discipline of Science with a first class (or a minimum of 60% marks / CGPA 6.5 on a 10- point scale in cases where the University/ Institute does not award any class). For Languages, Master’s degree with a minimum of 55% marks.

How To Apply:

1. The application shall be in the prescribed form which can be had from the Admission Officer by sending a crossed Demand Draft for Rs.600/- drawn in favour of “VIT University”, payable at Vellore.

2. All entries in the application form must be legible and should be written by the candidate in his/her own handwriting.

3. The name should be entered as in the Degree Certificate. Change in name/Initial, if any, should be supported by Gazette notification.

4. Recent passport size photograph should be affixed in the application on the space provided and the same should be attested by a competent authority.

5. If a candidate desires to apply for admission to more than one School/Centre, he/ she should use a separate application form for each.

6. They should indicate clearly the School/Centre and Area of research in the space provided in the application form.

7. Applications from candidates who are currently employed must be routed through their employers.

8. Attested copies of the following documents must be enclosed with the completed application form.
a. First page of SSLC / Higher Secondary / Matriculation or its equivalent certificate
b. All marks sheets / grade cards, degree certificates beginning from first degree towards proof of qualification. (Original certificates should not be enclosed)
c. Transfer certificate from the Institution last attended.
d. Service certificate from the present employer (This is a must for all applicants under External Part Time category.)

9. Applications received without the above documents will not be considered and no correspondence thereof will be entertained.

10. The completed application form with “ADMISSION TO Ph.D./ M.S. (BY RESEARCH) / M.Phil. PROGRAMME” superscribed on the cover should reach the “Admissions Officer”, VIT University, Vellore 632 014, Tamil Nadu, India, on or before 31-05-2008.


Important Dates:

Last date for issue of applications : 31-05-2008
Last date for receipt of completed applications : 31-05-2008
Date of Written Test / Interview : 14-06-2008
Last date of payment of fees for selected Candidates : 11-07-2008

For More Details Please CLICK HERE

---

NASSCOM Assessment of Competence-Technology (NAC-Tech)

---

NASSCOM Assessment of Competence-Technology (NAC-Tech)

About NAC – Tech

The Indian IT industry is growing at a tremendous pace. India's biggest competitive advantage is the educated English-speaking talent pool, and hence it is also imperative that we have sustainable workforce development initiatives in place for the longer term. The industry, under the aegis of NASSCOM, is looking at ways and means to ensure that the future of this industry is even brighter. Proactive workforce development is becoming a major requirement for the Indian Engineering sector, specifically the IT.

NASSCOM is following a multi-pronged approach to facilitate manpower development for the short and long term. It is aiming to build a base of IT manpower by targeting various apex bodies and campuses across the country, which will be certified, in tune with the needs of the industry and geared up for the future requirements of the sector.

In this initiative, NASSCOM is looking at creating an Assessment and Certification program which becomes an industry standard and ensures the transformation of a "trainable" workforce into an "employable workforce. This program will be offered to all students who aspire to get into Technology / Engineering industry.

A part of its focus on evolving such a certification program is to provide a credible assessment solution which is integrated into the existing engineering program framework. NASSCOM also wants to conduct a "pilot run" administered across the country, run to calibrate the test so that it could be benchmarked against national and international expectations and requirements.

CLICK HERE FOR NAC-Tech Test Matrix (Syllabus)

Eligibility:

BE, BTech, MCA, Msc-IT Final and Pre-final year students

60 % Aggregate in graduation, 12 Standard & 10th Standard

NACTECH - Benefits

Benefits for Students

• A common, transparent process across companies in the IT/Engineering Sector
• Ability to identify their strengths and areas of improvement and self-assess training needs

For Colleges

• This assessment will help enable the colleges to generate a quantifiable picture of the knowledge and skill level of its students. Based on this feedback, it can approach various IT companies and companies in other verticals aggressively for placement opportunities.

Benefits for the industry

• Creation of a national standard for recruitment on entry level talent.
• Upto 50 % cost savings in industry's sourcing costs.
• Ease of benchmarking for individual processes with industry standards.
• Ability to create visibility and reach out to a larger audience.

For More Details Please CLICK HERE

---

NAC-Tech NASSCOM 2008 Result

---

NASSCOM Assessment of Competence-Technology(NAC-Tech)

The Result of the NAC-Tech NASSCOM 2008 Punjab(Chandigarh) region has been declared today (1 May 2008), which was held on the date 17th April 18th April 2008 at Rayat Bahra Institute of Engineering & Bio-Technology Kharar.

The students who was given the test conducted by NAC-Tech NASSCOM can check their result at the website
http://nac.nasscom.in/nactech/web/RegisteredLogin.aspx

By Filling their:-
NACTECH ID
Photo-ID Document
Document No
Password
Which was provided to the students at the time of Registration by the NASSCOM.

For B.Tech, MCA-2009 Batch Only
There will be Special Set of Companies for those students who have appeared for NACTECH Test by NASSCOM at Rayat Bahra Institute of Engineering & Bio-Technology Kharar on 3rd May 2008

Click the following link to get more details about Mega Job Fest At Rayat Bahra

Mega Job Fair on 2nd , 3rd & 4th May, 2008 at Rayat Bahra


For More Details Please CLICK HERE

---

MCA 2nd Semester Question Paper Of C++ Of PTU University June 2007

---

Roll No. ......................
Total No. of Questions : 09]
J-1154[6289 A]
[Total No. of Pages : 03

[2957]

MCA (Semester-2nd)

OBJECT ORIENTED PROGRAMMING USING C++ (MCA-202)


Time : 03 Hours
Maximum Marks : 60

Instruction to Candidates:

1) Attempt any one question from each Section - A,B,C & D.

2) Section - E is compulsory

3) Use of Non-programmable Scientific Calculator is allowed.


Section – A
(1 * 9 = 9)

Q1)

(a) Explain briefly characteristics of OOPS language and mention advantages of OOPS approach over functional programming.

(b) Explain the following terms with suitable C++ examples.

(1) Type conversion; High level compiler rule for conversion.

(2) Conditional operator

(3) Make table group of operators in increasing order of precedence.

!, ++, --, -, *, /, %, +, -, <, >, <=, >=, ==, !=, ss, +=, -=, *=, /=, %=

Q2) Create equivalent four function calculator. The program requests the user to enter two integers. It carries out arithmetic addition of two numbers, multiples the result with the second number, divided the new result with the first original number and display the final result. The final result is acted upon by trigonometrical sine function. The calculations so stated above is
carried for subsequent sets of fresh integers.

Section - B
(1 * 9 = 9)

Q3)

(a) Give the tabular difference between structures, unions and classes.

(b) Give the tabular summary of lifetime, visibilty, intialized value, stoarage and purpose of automatic, external, automatic static variables.

Q4) Write a program to swap the two arrays of members by pointers, by reference and by value. Compare the three ways.


Section - C
(1 * 9 = 9)

Q5)

(a) Discuss the memory management function: MALLOC, CALLOC with suitable examples.

(b) Explain Inline member fuction and its benefits over simple function and C's macro

Q6) A survey was made to count number of 4 wheelers and 2 wheelers passing a kilometer distance in a busy road Delhi. the survey team needs to maintain the total count of both types of vehicles in an hour. Model this survey with class called 'SURVEY'. The data items are a type 'unsigned int' to hold the count of both kinds of vehicles. A constructor initializes both these to zero. A member function called 4 wheel ( ) increments the count and similarity a member function called 2 wheel ( ) increments the count respectively. A member function called display ( ) the two final total. Include prog. to test this class. The prog. should allow user to push one key to count 4 wheelers and another for 2 wheelers. Pressing ESC to display the counts and exit.

Section - D
(1 * 9 = 9)

Q7)

(a) Explain single operator overloading with most suitable program.


(b) Explain the concept of Abstract Classes, virtual base classes and friend functions.

Q8) Write a program to read data from xyz.dat file and write it into abc.dat file.


Section - E
(12 * 2 = 24)


Q9)

(a) A 'go to statement causes control to go to _________

(b) A function argument is a way that function resist accepting the calling programme's value (T/F).

(c) A data item that is a part of a class is called an __________ variable.

(d) Using pointer notation write some code that will transfer 80 characters from string s1 to string s2.

(e) Write a declaration for an overload assignment operator in class 'zeta'.

(f) A copy constructor is invoked when a function returns by reference (T/F).

(g) The statement f1.write (char*) & obj 1, size of (obj 1)); does ________

(h) Process.h is used for:

(i) N pointer to 'void' can hold pointers to _________

(j) A constructor is executed automatically when an object is __________

(k) Write a statement that will read the contents of one 'ifstream' object called 'if file' into an array called 'buff'.

(l) A child is said to be __________ from a base class.

---

MCA 3rd Semester Question Paper Of Software Engineering of PTU University December 2007

---

Paper ID [MC402]

(Please fill this paper ID in OMR sheet)

MCA (Sem.-3rd)

SOFTWARE ENGINEERING (MCA - 402 (N2))

Time : 03 Hours
Maximum Marks : 60

Instruction to Candidates:

1) Attempt any one question from each Section - A,B,C & D.

2) Section - E is compulsory


Section – A
(1 * 10 = 10)

Q1) What are the various parameters which define the quality of software? How it can be measured?

Q2) Discuss the limitations of software process models. Which according to you is the best model of software development? Justify your answer.


Section - B
(1 * 10 = 10)

Q3) When is cost estimation done? Discuss the COCOMO model along with the parameters defined in it.

Q4)

(a) What is the need of software planning? Explian the objectives of sofware planning.

(b) What are principles of structured analysis?

Section - C
(1 * 10 = 10)

Q5) Discuss odject oriented concepts in details.

Q6)

(a) What5 are the various design methodologies?

(b) What does abstraction in software design provides.


Section - D
(1 * 10 = 10)

Q7) Differentiate between the following.

(a) Unit Testing and Integarton Testing.

(b) White Box Testiong and Black Box Testing.

Q8) Why testing is neccesary phase of software development? Discuss the relevance of various types of testing.


Section - E
(10 * 2 = 20)


Q9)

a) Why there is need of stastical quality assurance?

b) What is need of design methodoliges?

c) Define the term Internal documentation.

d) What are evolutionary process model users?

e) What is purpose of DFD?

f) What is the role of metrices in the software development.

g) List some software design objectives?

h) What is software equation?

i) What is the use of linear process models?

j) Define Prototyping.

---

ISTE-AICTE Sponsored one week Short Term Training Program on Latest Advances in Algorithm Analysis and Design

---

ISTE-AICTE Sponsored one week
Short Term Training Program
on
Latest Advances in Algorithm Analysis and Design

June 09,2008 to June 13, 2008

Computer Science and Engineering Department
Thapar University, Patiala-147004
Web Site: www.thapar.edu
Phone: 91-175-2393007, +91-9815599654
Fax: 91-175-2364498, 91-175-2393020
Email: deepakgarg@ieee.org

Objective and details of the course

Research in the field of Algorithms is reaching new frontiers. Algorithms are at the core of any computer software. Due to increase in heterogeneity, size and complexity of the problems the need of efficient algorithms is increasing in all areas of applications. The objective of the program is to update and enhance the knowledge in the. It will also give an insight into the latest developments in the field of algorithms. This will also help participants to learn about the latest research going on in the field of algorithms and also the new teaching methodologies that can be used to teach the subject. Program will cover data structures, algorithm analysis techniques, algorithm design techniques, intelligent algorithms, approximation algorithms and other latest developments in the area of algorithms. The Program will be inclusive and exhaustive. Course will have experts from the field of algorithms to have a deep look at specific topics.

Eligibility/TA/DA/Boarding/Lodging
Teachers/Scientists working in AICTE/UGC/Govt. of India approved institutes or organizations are eligible to apply. Participants from Industry are also welcome.
Boarding & Lodging will be arranged free of cost in the newly constructed PG hostel having all the basic facilities. All the candidates will be entitled for the 2nd Class train/bus fare of the shortest route on production of actual tickets. The candidates who wish to travel in the higher class will be paid the 2nd class fair and they may get the difference fair from their parent institutions.

Registration/Payments
A Registration fee of Rs. 1000/- has to be paid in the form of a Demand Draft (DD) in favor of “ISTE-STTP-LAAAD-2008” payable at Patiala. The last date of registration is 20th May 2008.

For More Details Please CLICK HERE

---

ISTE-NSTEDB Sponsored three day Faculty Awareness Camp on Entrepreneurship

---

ISTE-NSTEDB Sponsored three day
Faculty Awareness Camp on
Entrepreneurship
June 14,2008 to June 16, 2008

Computer Science and Engineering Department
Thapar University, Patiala-147004
Web Site: www.thapar.edu
Phone: 91-175-2393007, +91-9815599654
Fax: 91-175-2364498, 91-175-2393020
Email: deepakgarg@ieee.org

Objective and details of the course

1. To create an awareness among the teachers with respect to entrepreneurship an its
importance.

2. To train the teachers of engineering colleges and polytechnic colleges in the field of entrepreneurship.

3. To spread the culture of entrepreneurship among the young teachers to help them to become successful entrepreneurs

Eligibility/TA/DA/Boarding/Lodging

Teachers/Scientists working in AICTE/UGC/Govt. of India approved institutes or organizations are eligible to apply. Participants from Industry are also welcome.
Boarding & Lodging will be arranged free of cost in the newly constructed PG hostel having all thebasic facilities. All the candidates will be entitled for the 2nd Class train/bus fare of the shortest route on production of actual tickets. The candidates who wish to travel in the higher class will be paid the 2nd class fair and they may get the difference fair from their parent institutions.

Registration/Payments

A Registration fee of Rs. 600/- has to be paid in the form of a Demand Draft (DD) in favor of “ISTE-STTP-LAAAD-2008” payable at Patiala. The last date of registration is 20th May 2008.

For More Details Please CLICK HERE

---

AICTE Sponsored two weeks Staff Development Program Design and Analysis of Algorithms

---

AICTE Sponsored two weeks Staff Development Program
on
Design and Analysis of Algorithms

May 26,2008 to June 06, 2008

Computer Science and Engineering Department
Thapar University, Patiala-147004
Web Site: www.thapar.edu
Phone: 91-175-2393007, +91-9815599654
Fax: 91-175-2364498, 91-175-2393020
Email: deepakgarg@ieee.org

Eligibility/TA/DA/Boarding/Lodging

Teachers/Scientists working in AICTE/UGC/Govt. of India approved institutes or organizations are eligible to apply. Participants from Industry are also welcome.
Boarding & Lodging will be arranged free of cost in the newly constructed PG hostel having all the basic facilities. All the candidates will be entitled for the AC-3 Tier train/deluxe bus fare of the shortest route on production of actual tickets.

Registration/Payments

A Registration fee of Rs. 2000/- has to be paid in the form of a Demand Draft (DD) in favor of “SDP-Algorithms” payable at Patiala. The last date of registration is 15th May 2008.

For More Details Please CLICK HERE

---

TIFAC-CORE, Thapar University, Patiala Organizes 2 Weeks Hands-on Training Program on WATER & WASTEWATER ANALYSIS

---

TIFAC-CORE, Thapar University, Patiala Organizes 2 Weeks Hands-on Training Program on WATER & WASTEWATER ANALYSIS (June 23rd to July 4th, 2008)

Contents
Special lectures on:
• Water laboratories and their infrastructure
• Parameters of interest in water and wastewater analysis
• Techniques for collection, preservation, transportation, storage and analysis of water and wastewater samples
• Spectrophotometer, GC and AAS
• Legal provisions related to sampling, analysis and reporting
• Data logging and data analysis
• Quality control and quality assurance
• Accreditations and recognitions of water laboratories

Duration: two weeks (23rd June to 4th July 2008)

Last date of receipt of applications: June 15, 2008

Course fee: Rs. 5000/- per participant.

How To Apply:
The fee is payable only through DD in favour of Coordinator TIFAC-CORE payable at Patiala along with complete registration form ( being attached here) well
before the last date. The fee includes registration kit, course material, certificate and daily working lunches/tea and does not include accommodation and boarding. However, on prior request, accommodation and boarding can be arranged to the participants within the university campus at very reasonable cost on payment basis.

For further information, please contact:
Dr. A. S. Reddy
Course Coordinator
Training on Water and Wastewater Analysis
TIFAC-CORE, Thapar University, Patiala –
147 004
Telephone: 0175– 2393393, 2393743 ( O)
Mob. : 92164-19899;
Fax: ( 0175) – 2393738
Email: siva19899@yahoo.com; hcore@tiet.ac.in
Last Date for Registration: 15th June, 2008

For More Details Please CLICK HERE

---

STEP-TU Organises 6-Week Summer Training on Business Development in Agro-Biotechnology (Thapar university)

---

STEP-TU Organises 6-Week Summer Training on Business Development in
Agro- Biotechnology
(JUNE 02 – JULY 11, 2008)
www.thapar.edu

Business development in Agro-biotechnology is an intensive hands on training programme imparting technical knowledge and developing entrepreneurial skills in different thrust areas, which will be covered in four modules each of 10 days duration.

Module A: Plant Tissue culture

Plant tissue culture is the art of in vitro multiplication of commercially important plant species for their large-scale clonal propagation, conservation and management.
Thousands of plants can be propagated in less space and short time. There is high demand for quality planting material. The programme will impart training for establishment of tissue culture as a viable enterprise.

Contents
1. Stock and Media preparation.
2. Mass propagation using different propagating techniques.
3. Hardening and acclimatization.

Duration: 10 days (June 02–June11, 2008)

Module B: Techniques in Genetic Engineering

This module comprises of principles and techniques in molecular biology such as DNA isolation, purification and separation and bacterial transformation.

Contents
1. Genomic DNA and plasmid DNA isolation from bacteria.
2. Restriction digestion, transformation and gel electrophoresis.
3. PCR amplification.

Duration: 10 days (June 12- 21, 2008)

Module C: Organic Farming and Mushroom Cultivation

This course illustrates role of organic farming and beneficial soil microbes in agriculture and forestry. It comprises of practical training on mass production and quality assurance of microbial inoculants. Mushroom cultivation covers the
production of edible fungi using agricultural wastes.

Contents
1. Mass production of microbial inoculants, including quality control measures.
2. Analysis of soil (pH, EC, organic carbon, Ava. N and Ava. P).
3. Illustrate techniques of composting.
4. Quality spawn production.
5. Cultivation of mushroom using agricultural wastes.

Duration: 10 days (June 23–July 02, 2008)

Module D: Food Processing and Food Safety

The course will cover importance and the need of food processing and food safety and minimize post-harvest losses through value addition of agricultural produce. It
will provide an insight for setting up of food processing units.

Contents
1. Various aspects on food quality testing.
2. Product development and its shelf study.
3. Heavy metal analysis by AAS and pesticides by GC.

Duration: 10 days (July 03-12, 2008)

Course Fee
Rs. 16,000/- @ Rs. 4000/- per module per participant. (Course fee includes only Programme fee and course material; Boarding/lodging and travel to be borne by the candidate; Campus hostel accommodation can be provided on request on chargeable basis)

No of Seats: 25 in each module

Last date for registration: May 25, 2008

Contact:
Dr. Dinesh Goyal
Executive Director
STEP
Thapar University
PATIALA – 147 004 (Punjab)
Tel: (0175)–2393011, 2393314 (O), 2393213 (R)
Fax: (0175) – 2393011
E-mail: ccstep@tiet.ac.in; d_goyal_2000@yahoo.com

For More Details Please CLICK HERE

---

Six Weeks Summer Training On J2EE – Oracle at Thapar University, Patiala

---

Six Weeks Summer Training
On
J2EE – Oracle
(June 9th - July 18th, 2008)

Computer Science & Engineering Department
Thapar University, Patiala
www.thapar.edu
Course Coordinator: Ravinder Kumar
ravinder@tiet.ac.in

Computer Science Department of Thapar University is equipped with world class infrastructure and highly qualified faculty renowned for teaching and research. Department is NBA and ISO accredited and has collaborations with industries like Intel, SUN, IBM, Infosys and Microsoft.

Course Highlights
· Includes project work at the end of the training.
· Theory and practical sessions by certified teachers.
· Digital rooms and state of the art labs.
· Well designed digital course content with examples and demos.

Duration of course: June 09th to July 18th, 2008 (45 days)

FOR REGISTRATION FORM PLEASE CLICK HERE

Fees: Complete Course fees is Rs 5,000/ (rupees five thousands only) per candidate. The boarding & lodging on campus can be provided to outstation candidates on request at a nominal additional cost.

Registration: The attached registration form may kindly be submitted to the coordinator by June 02, 2008 at the following address.

Course Coordinator,
Ravinder Kumar
Department of Computer Science & Engineering
Thapar University,
Patiala – 147004
Phone: 0175- 2393075
Mobile: 09815733726

Co-coordinator
Dr. Deepak Garg
Assistant Professor
Department of Computer Science & Engineering
Thapar University,
Patiala – 147004
Phone: 0175- 2393007

Last date for submission of Registration form along with Demand Draft is June 02, 2008.

For More Details Please CLICK HERE

---

CEEP Course on SOFTWARE APPLICATIONS IN ELECTRICAL ENGINEERING (Thapar University, Patiala)

---

Thapar University Patiala
www.thapar.edu

CEEP Course
on

SOFTWARE APPLICATIONS IN ELECTRICAL ENGINEERING

Department of Electrical & Instrumentation Engineering of this university is organising a CEEP Course titled, SOFTWARE APPLICATIONS IN ELECTRICAL ENGINEERING" during May 15-16, 2008.

OBJECTIVE
The aim of the course is to introduce the participants to the potential software
application in electrical engineering. The participants will also be given hands-on
exposure to the modeling and computing.

COURSE CONTENTS
HVDC and FACTS, power system planning scheduling, stability and control, power quality issues, soft computing applications, application of fuzzy logic and artificial neural networks, modeling and simulation of engineering systems( like Graph Theory, Petri Nets), genetic algorithms in electrical engineering, DSP applications, motor drives stability and control etc.

COURSE FEE
Participants of academic institutions Rs. 1500/-
Participation from R&D/Industry Rs. 3000/-
Student participation Rs. 800/-

Accommodation is limited and can be provided in few cases. Applications should be made on the registration form attached along with a prescribed course fee in the
form of cross demand draft in favour of “ Thapar University Patiala” payable at Patiala or cash in the office of EIED. In case, numbers of students from any institute are more than 25, then the fees per student will be Rs. 700/- Boarding, lodging & other expenses shall be borne by the participants.

IMPORTANT DATES
Last date for receiving application
May 12, 2008

Information about selection
May 13, 2008

Address for Correspondence
To,
Mr. Parag Nijhawan
Department of Electrical & Instrumentation Engineering
Thapar University, Patiala-147004,
Punjab (INDIA)
Phone: 0175- 2393052, 2393055 (O)
Mobile(s) :
09815613057, 09815612511, 09872980550
Fax: 0175-2393005
Email: heied@tiet.ac.in, smarajitg@hotmail.com
yad_pra@yahoo.com

For More Details Please CLICK HERE

---

Admission To M.Sc 2008 (Thapar university Patiala)

---

Thapar university Patiala

Thapar University, Patiala offeres Master of Science (M.Sc) programmes in the following disciplines:

(1) PHYSICS
(2) CHEMISTRY
(3) MATHEMATICS & COMPUTING

Last Date for receiving the application is 13.06.2008

Contact: 0175-2393116, 2393128, 2393436

For More Details Log On To www.thapar.edu

---

Admission To MBA (Software Enterprise Management) From Centre Of Development Of Advanced Computing

---

Centre Of Development Of Advanced Computing
Admission Notice 2008-09
MBA (Software Enterprise Management)

Two Years ful time Programme approved by AICTE & affiliated with GGSIP University, Delhi

students meting the following eligibility criteria may appear in Common Entrance Test (CET) to be held on 22-06-2008 across the country.

Eligibility:
B.E/ B.Tech with minimum of 60 % marks.
M.Sc (CS)/ M.Sc (IT) / M.Sc (Electronics) with Minimum of 60 % marks
MCA with minimum of 60 % marks.

The Brochure & Application form can be downloaded from www.cdacnoida.in or www.ipu.ac.in

For More Details Please CLICK HERE

---